DMX512 Programable SPI Led Controller H807SA 8192Pixels for DMX512 WS2811 WS2812B WS2815 APA102 Led Strip

Digital to Analog ConvertersH807SA is the upgraded version of H801RSDMX512 Programable SPI Led Controller H807SA 8192Pixels for DMX512 WS2811 WS2812B WS2815 APA102 Led Strip. Introduction:H807SA has 8outputs, supports maximum 8196 pixels, it Support Art-Net protocol and can workwith DMX console or set address for DMX chips .H807SA also can add or deleteDAT files through the LAN.. Features:1.Eight output ports to control up to 8192 pixels.The maximum control point per port is 1024.2. The SD cardsupports FAT32 and FAT16 formats and allows up to 64 DAT files.3.It can be controlled synchronously by the LAN. Youcan switch files by sending UDP instructions to the network port 2, or obtainthe serial number of the current playing file.4.It can connect to DMX console, support RGBW,replace files, adjust speed and brightness, and respond quickly.5.Support art net protocol, and can directly usemadrix, jinx and other software supporting art net.6.Support the encryption function of limiting poweron times.7. DMX chip addressing is supported, with counting points and internal controltest functions.8. It can be connected and detached. It can bedirectly connected to computer network card, router or main controller.9.Support onlinefirmware upgrade.10.Set sculpt of DAT to support DAT files of different shapes.11.W can beinserted.. Instructions:1.SD card needs to be formatted into FAT32 or FAT16format after adding and deleting files many times. Support SDHC (High CapacitySD card), up to 64g bytes. Up to 64 DAT files are allowed in the SD card, andthe playback order is sorted alphabetically according to the file name.2.Eight output ports to control up to 8192 pixels.The maximum number of control points per port is 1024. It can also be set asone, two or four output ports. Each port can control 2048 points at most, andthe remaining ports can be used as a backup of the used ports. Actually, themaximum output of each port is 1600 points, a total of 12800 points.Qed3110 chip can only select eight port output, and d986x can only selecteight port or one port output.Tm1812 and simultaneous sequence chip support 16 ports. Select 16 lines andone sub control in the computer software, and each port can output 800 pointsat most. Ports 1-8 are output by DAT and ports 9-16 are output by CLK. Thisfunction works online, offline and artnet.3. When powered on, the first line of displays thecontroller model, and the second line displays the version number. Press and holdthe "menu" key before power on, and the controller will automaticallyupgrade the firmware.4. Press menu key to switch menu, press' - 'or' + 'keyto set, long press' -' or '+' key to accelerate parameter setting, press OK keyto save parameters or enter submenu.5.Set the password. In the light modeling window ofLED programming software, click the menu "setting" --"controller password" to pop up the encryption dialog box. Select thecontroller encryption. The encryption method is to limit the number of poweron. After the first encryption, the second encryption can be performed withoutdecryption to prolong the use times.==========High-concerned chemical : NoneModel Number : H807SAOscillation frequency : 50/60hzConnection Mode : GND-GND, CLK(D-)-CLK(D-), DAT(D+)-DAT(D+)Voltage : 110-240VMaterial : metalWattage : 1wPower : ACMax. Load Power : 1wRemote Distance : no remoteApplicable Lights : ttl pixel lightsControled Method : SPI SD cardItem Type : RGB controleroutput ports number : 8drive pixels number : 32 universes 5440 pixelsConnection Mode : GND-GND, CLK(D-)-CLK(D-), DAT(D+)-DAT(D+)Controled Method : SD card/DMX console/Madrix/LAN synchrony

• Digital to Analog Converters